Wireless Room Thermostat Hidden Camera
This typical run-of-the-mill room thermostat is integrated with a hidden pinhole lens spy camera, with built-in colour camera and transmitter, which is able to wirelessly transmit footage to the receiver provided. Since there are no wires involved in the set up and operation of this device, it can be useful in lots of different scenarios.
The receiver can be placed up to 100M away within line of sight of the transmitter. To view footage, simply connect the receiver to your TV or VCR via SCART or Phono cables. The device is powered by a standard 9 volt battery or power pack.
Note: for best results, use the product in an area with clear line of sight between transmitter and receiver. Obstructions can impact how effectively the device performs transmission, including trees, buildings, cars, interfering equipment, the moving human body, rain and water.
To get the optimal reception, you should set up the antennas of the transmitter / receiver 4.5 to 6ft (1.5 to 2m) above the ground. We advise that you test all devices before finally installing them to be used, since the transmission quality can usually be made clearer with slight adjustments to the device’s components. When the system is not in use it should be switched off. Do not touch the antennas when the system is switched on. Do not place the receiver behind a monitor.
If you would prefer to use this product with a computer or laptop, you must purchase a USB recording device.
- 2.4 GHz Mini. Transmitter W/Colour Camera
- RF output power: CE & BZT compliant
- Operating power: .8-7.2V
- Power consumption: 100mA
- Antenna: Omni-directional antenna
- Transmitting range: 100 M (Line-Of-Sight)
- Weight: 11 grams
- Pixels: 365K (PAL), 250K (NTSC)
- Resolution: Horizontal 380 TV Lines
- Auto Electronic Exposure: 1/60 ?1/2000 sec.
- Automatic Exposure/Gain/White balance.
- Mini. Illumination: <3 Lux f 1.2
- Pin Hole Lens: 5.6mm
- Field angle: 60 degrees