This very small, lightweight, and reasonably priced inspection camera is ideal for looking in those normally hard or impossible places to see in without removing a panel, moving an appliance or a great deal of work.

The 9.2mm diameter tube (17mm at the tip) is one meter long and whilst it is flexible enough for angling into required positions it is also rigid so that it holds whilst being used.  The tube is water resistant so it can even be used in liquids, engines, drains, etc. and there is a light on the tip with a brightness control on the handle.

This system is supplied with a 2.4” colour TFT monitor for live viewing of the camera, which attaches to the controller/handle.  This monitor has a rechargeable battery pack that will last for more than five hours on a full charge and also has a video output for recording, etc.

This is also supplied with three attachments, a mirror for looking at angles and round corners, a hook for hooking lost/missing/hard to get items and a magnet for the same.
 
 
CAMERA SPECIFICATIONS:
Image Sensor                  CMOS
Total Pixels                       704*576 (PAL) and 712*486 (NTSC)
Viewing Angle                  50 degrees
Minimum Illumination    0 lUX
Power Supply                  4 x AA batteries (not included)
Dimensions                    186*145*41mm (excluding tube)
Weight                              540g (including tube)

MONITOR SPECIFICATIONS:
LCD Screen Type           2.36" TFT-LCD
Effective Pixels                480*240
Video System                  PAL/NTSC
Power Supply/Charger  8V DC
Consumption Current   450mA (max)
Video Output                    0.9-1.3V @ 75Ohm
Dimensions                     100*70*30mm
Weight                               140g
Operating Temp.             -10~+50 centigrade
Operating Humidity        15~85%RH

SUPPLIED WITH:
1 x Flexible camera
1 x Camera handle/controller
1 x Monitor
1 x Charger
3 x Camera tip attachments
1 x Instruction manual